umount: ./tmp/dpkg-overlay_py_nvme/proc: no mount point specified. umount: ./tmp/dpkg-overlay_py_nvme/sys: no mount point specified. umount: ./tmp/dpkg-overlay_py_nvme/root/.ccache: no mount point specified. umount: ./tmp/dpkg-overlay_py_nvme: no mount point specified. umount: ./tmp/dpkg-overlay_py_nvme: not found umount: ./tmp/tmpfs_py_nvme: not found Restoring CHROOT_BASEDIR for runs... Parallel unsquashfs: Using 12 processors 33705 inodes (39832 blocks) to write [===========================================================|] 39832/39832 100% created 29561 files created 3530 directories created 4130 symlinks created 8 devices created 0 fifos dpkg-buildpackage: info: source package py-nvme-build-deps-depends dpkg-buildpackage: info: source version 0.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Equivs Dummy Package Generator dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean make[1]: Entering directory '/dpkg-src/equivs.P898x4' dh clean dh_clean make[1]: Leaving directory '/dpkg-src/equivs.P898x4' debian/rules binary make[1]: Entering directory '/dpkg-src/equivs.P898x4' dh binary dh_update_autotools_config dh_autoreconf create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/py-nvme-build-deps-depends/ dh_install dh_installdocs dh_installchangelogs dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'py-nvme-build-deps-depends' in '../py-nvme-build-deps-depends_0.1_all.deb'. make[1]: Leaving directory '/dpkg-src/equivs.P898x4' dpkg-genbuildinfo --build=binary -O../py-nvme-build-deps-depends_0.1_amd64.buildinfo dpkg-genchanges --build=binary -O../py-nvme-build-deps-depends_0.1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) The package has been created. Attention, the package has been created in the current directory, not in ".." as indicated by the message above! WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: cython3 dh-python javascript-common libexpat1-dev libjs-jquery libjs-sphinxdoc libjs-underscore libpython3-dev libpython3.11 libpython3.11-dev python3-dev python3-distutils python3-lib2to3 python3-setuptools python3.11-dev zlib1g-dev Suggested packages: cython-doc flit python3-build python3-tomli python3-installer apache2 | lighttpd | httpd python-setuptools-doc The following NEW packages will be installed: cython3 dh-python javascript-common libexpat1-dev libjs-jquery libjs-sphinxdoc libjs-underscore libpython3-dev libpython3.11 libpython3.11-dev py-nvme-build-deps-depends python3-dev python3-distutils python3-lib2to3 python3-setuptools python3.11-dev zlib1g-dev 0 upgraded, 17 newly installed, 0 to remove and 0 not upgraded. Need to get 11.2 MB/11.2 MB of archives. After this operation, 49.1 MB of additional disk space will be used. Get:1 /dpkg-src/py-nvme-build-deps-depends_0.1_all.deb py-nvme-build-deps-depends all 0.1 [2168 B] Get:2 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 cython3 amd64 0.29.32-2+b1 [1302 kB] Get:3 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 python3-lib2to3 all 3.11.2-3 [76.3 kB] Get:4 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 python3-distutils all 3.11.2-3 [131 kB] Get:5 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 dh-python all 5.20230130 [104 kB] Get:6 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 javascript-common all 11+nmu1 [6260 B] Get:7 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 libexpat1-dev amd64 2.5.0-1 [150 kB] Get:8 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 libjs-jquery all 3.6.1+dfsg+~3.5.14-1 [326 kB] Get:9 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 libjs-underscore all 1.13.4~dfsg+~1.11.4-3 [116 kB] Get:10 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 libjs-sphinxdoc all 5.3.0-4 [130 kB] Get:11 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 libpython3.11 amd64 3.11.2-6 [1988 kB] Get:12 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 zlib1g-dev amd64 1:1.2.13.dfsg-1 [916 kB] Get:13 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 libpython3.11-dev amd64 3.11.2-6 [4738 kB] Get:14 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 libpython3-dev amd64 3.11.2-1+b1 [9572 B] Get:15 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 python3-setuptools all 66.1.1-1 [521 kB] Get:16 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 python3.11-dev amd64 3.11.2-6 [615 kB] Get:17 http://apt.tn.ixsystems.com/apt-direct/cobia/23.10-RC.1/debian bookworm/main amd64 python3-dev amd64 3.11.2-1+b1 [26.2 kB] Fetched 11.2 MB in 0s (43.4 MB/s) E: Can not write log (Is /dev/pts mounted?) - posix_openpt (2: No such file or directory) Selecting previously unselected package cython3. (Reading database ... 32414 files and directories currently installed.) Preparing to unpack .../00-cython3_0.29.32-2+b1_amd64.deb ... Unpacking cython3 (0.29.32-2+b1) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../01-python3-lib2to3_3.11.2-3_all.deb ... Unpacking python3-lib2to3 (3.11.2-3) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../02-python3-distutils_3.11.2-3_all.deb ... Unpacking python3-distutils (3.11.2-3) ... Selecting previously unselected package dh-python. Preparing to unpack .../03-dh-python_5.20230130_all.deb ... Unpacking dh-python (5.20230130) ... Selecting previously unselected package javascript-common. Preparing to unpack .../04-javascript-common_11+nmu1_all.deb ... Unpacking javascript-common (11+nmu1) ... Selecting previously unselected package libexpat1-dev:amd64. Preparing to unpack .../05-libexpat1-dev_2.5.0-1_amd64.deb ... Unpacking libexpat1-dev:amd64 (2.5.0-1) ... Selecting previously unselected package libjs-jquery. Preparing to unpack .../06-libjs-jquery_3.6.1+dfsg+~3.5.14-1_all.deb ... Unpacking libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Selecting previously unselected package libjs-underscore. Preparing to unpack .../07-libjs-underscore_1.13.4~dfsg+~1.11.4-3_all.deb ... Unpacking libjs-underscore (1.13.4~dfsg+~1.11.4-3) ... Selecting previously unselected package libjs-sphinxdoc. Preparing to unpack .../08-libjs-sphinxdoc_5.3.0-4_all.deb ... Unpacking libjs-sphinxdoc (5.3.0-4) ... Selecting previously unselected package libpython3.11:amd64. Preparing to unpack .../09-libpython3.11_3.11.2-6_amd64.deb ... Unpacking libpython3.11:amd64 (3.11.2-6) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../10-zlib1g-dev_1%3a1.2.13.dfsg-1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ... Selecting previously unselected package libpython3.11-dev:amd64. Preparing to unpack .../11-libpython3.11-dev_3.11.2-6_amd64.deb ... Unpacking libpython3.11-dev:amd64 (3.11.2-6) ... Selecting previously unselected package libpython3-dev:amd64. Preparing to unpack .../12-libpython3-dev_3.11.2-1+b1_amd64.deb ... Unpacking libpython3-dev:amd64 (3.11.2-1+b1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../13-python3-setuptools_66.1.1-1_all.deb ... Unpacking python3-setuptools (66.1.1-1) ... Selecting previously unselected package python3.11-dev. Preparing to unpack .../14-python3.11-dev_3.11.2-6_amd64.deb ... Unpacking python3.11-dev (3.11.2-6) ... Selecting previously unselected package python3-dev. Preparing to unpack .../15-python3-dev_3.11.2-1+b1_amd64.deb ... Unpacking python3-dev (3.11.2-1+b1) ... Selecting previously unselected package py-nvme-build-deps-depends. Preparing to unpack .../16-py-nvme-build-deps-depends_0.1_all.deb ... Unpacking py-nvme-build-deps-depends (0.1) ... Setting up javascript-common (11+nmu1) ... Setting up libpython3.11:amd64 (3.11.2-6) ... Setting up libexpat1-dev:amd64 (2.5.0-1) ... Setting up cython3 (0.29.32-2+b1) ... Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ... Setting up libjs-jquery (3.6.1+dfsg+~3.5.14-1) ... Setting up python3-lib2to3 (3.11.2-3) ... Setting up libjs-underscore (1.13.4~dfsg+~1.11.4-3) ... Setting up python3-distutils (3.11.2-3) ... Setting up dh-python (5.20230130) ... Setting up python3-setuptools (66.1.1-1) ... Setting up libpython3.11-dev:amd64 (3.11.2-6) ... Setting up libjs-sphinxdoc (5.3.0-4) ... Setting up libpython3-dev:amd64 (3.11.2-1+b1) ... Setting up python3.11-dev (3.11.2-6) ... Setting up python3-dev (3.11.2-1+b1) ... Setting up py-nvme-build-deps-depends (0.1) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9) ... dch warning: Recognised distributions are: experimental, unstable, testing, stable, oldstable, oldoldstable, {bullseye,buster,stretch,jessie,wheezy}-proposed-updates, {testing,stable,oldstable,oldoldstable}-proposed-updates, {bullseye,buster,stretch,jessie,wheezy}-security, {testing,stable,oldstable,oldoldstable}}-security, bullseye-backports, bookworm-backports and UNRELEASED. Using your request anyway. Running build command: ' debuild --no-lintian -j12 -us -uc -b' dpkg-buildpackage -us -uc -ui -j12 -b dpkg-buildpackage: info: source package py-nvme dpkg-buildpackage: info: source version 20230915203808~truenas+1 dpkg-buildpackage: info: source distribution bullseye-truenas-unstable dpkg-buildpackage: info: source changed by Caleb dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 dpkg-source: info: using options from dpkg-src/debian/source/options: --extend-diff-ignore=\.egg-info$ debian/rules clean dh clean --with python3 --buildsystem=pybuild dh_auto_clean -O--buildsystem=pybuild I: pybuild base:240: python3.11 setup.py clean Compiling nvme.pyx because it changed. [1/1] Cythonizing nvme.pyx running clean removing '/dpkg-src/.pybuild/cpython3_3.11/build' (and everything under it) 'build/bdist.linux-x86_64' does not exist -- can't clean it 'build/scripts-3.11' does not exist -- can't clean it dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild debian/rules build dh build --with python3 --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild I: pybuild base:240: python3.11 setup.py config running config dh_auto_build -O--buildsystem=pybuild I: pybuild base:240: /usr/bin/python3 setup.py build running build running build_ext building 'nvme' extension creating build creating build/temp.linux-x86_64-cpython-311 x86_64-linux-gnu-gcc -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.11 -c nvme.c -o build/temp.linux-x86_64-cpython-311/nvme.o x86_64-linux-gnu-gcc -shared -Wl,-O1 -Wl,-Bsymbolic-functions -g -fwrapv -O2 -Wl,-z,relro -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 build/temp.linux-x86_64-cpython-311/nvme.o -L/usr/lib/x86_64-linux-gnu -o /dpkg-src/.pybuild/cpython3_3.11/build/nvme.cpython-311-x86_64-linux-gnu.so dh_auto_test -O--buildsystem=pybuild I: pybuild base:240: cd /dpkg-src/.pybuild/cpython3_3.11/build; python3.11 -m unittest discover -v ---------------------------------------------------------------------- Ran 0 tests in 0.000s OK create-stamp debian/debhelper-build-stamp debian/rules binary dh binary --with python3 --buildsystem=pybuild dh_testroot -O--buildsystem=pybuild dh_prep -O--buildsystem=pybuild dh_auto_install --destdir=debian/python3-nvme/ -O--buildsystem=pybuild I: pybuild base:240: /usr/bin/python3 setup.py install --root /dpkg-src/debian/python3-nvme running install /usr/lib/python3/dist-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( running build running build_ext running install_lib creating /dpkg-src/debian/python3-nvme/usr creating /dpkg-src/debian/python3-nvme/usr/lib creating /dpkg-src/debian/python3-nvme/usr/lib/python3.11 creating /dpkg-src/debian/python3-nvme/usr/lib/python3.11/dist-packages copying /dpkg-src/.pybuild/cpython3_3.11/build/nvme.cpython-311-x86_64-linux-gnu.so -> /dpkg-src/debian/python3-nvme/usr/lib/python3.11/dist-packages running install_egg_info running egg_info creating nvme.egg-info writing nvme.egg-info/PKG-INFO writing dependency_links to nvme.egg-info/dependency_links.txt writing top-level names to nvme.egg-info/top_level.txt writing manifest file 'nvme.egg-info/SOURCES.txt' reading manifest file 'nvme.egg-info/SOURCES.txt' adding license file 'LICENSE' writing manifest file 'nvme.egg-info/SOURCES.txt' Copying nvme.egg-info to /dpkg-src/debian/python3-nvme/usr/lib/python3.11/dist-packages/nvme-0.0.2.egg-info Skipping SOURCES.txt running install_scripts dh_installdocs -O--buildsystem=pybuild dh_installchangelogs -O--buildsystem=pybuild dh_python3 -O--buildsystem=pybuild dh_installinit -O--buildsystem=pybuild dh_installsystemduser -O--buildsystem=pybuild dh_perl -O--buildsystem=pybuild dh_link -O--buildsystem=pybuild dh_strip_nondeterminism -O--buildsystem=pybuild dh_compress -O--buildsystem=pybuild dh_fixperms -O--buildsystem=pybuild dh_missing -O--buildsystem=pybuild dh_installdeb -O--buildsystem=pybuild dh_gencontrol -O--buildsystem=pybuild dh_md5sums -O--buildsystem=pybuild dh_builddeb -O--buildsystem=pybuild dpkg-deb: building package 'python3-nvme' in '../python3-nvme_20230915203808~truenas+1_all.deb'. dpkg-genbuildinfo --build=binary -O../py-nvme_20230915203808~truenas+1_amd64.buildinfo dpkg-genchanges --build=binary -O../py-nvme_20230915203808~truenas+1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-source: info: using options from dpkg-src/debian/source/options: --extend-diff-ignore=\.egg-info$ dpkg-buildpackage: info: binary-only upload (no source included) Copying finished packages umount: ./tmp/dpkg-overlay_py_nvme/root/.ccache: no mount point specified. umount: /truenas-releng/tmp/dpkg-overlay_py_nvme: target is busy. Building local APT repo Packages.gz... dpkg-scanpackages: warning: Packages in archive but missing from override file: dpkg-scanpackages: warning: python3-nvme dpkg-scanpackages: info: Wrote 1 entries to output Packages file.