umount: ./tmp/dpkg-overlay_smartmontools/proc: no mount point specified.
umount: ./tmp/dpkg-overlay_smartmontools/sys: no mount point specified.
umount: ./tmp/dpkg-overlay_smartmontools: no mount point specified.
umount: ./tmp/dpkg-overlay_smartmontools: not found
umount: ./tmp/tmpfs_smartmontools: not found
Restoring CHROOT_BASEDIR for runs...
Parallel unsquashfs: Using 12 processors
32591 inodes (37962 blocks) to write
[===========================================================/] 37962/37962 100%
created 28425 files
created 3355 directories
created 4152 symlinks
created 8 devices
created 0 fifos
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Get:1 file:/packages InRelease
Ign:1 file:/packages InRelease
Get:2 file:/packages Release
Ign:2 file:/packages Release
Get:3 file:/packages Packages
Ign:3 file:/packages Packages
Get:4 file:/packages Translation-en
Ign:4 file:/packages Translation-en
Get:3 file:/packages Packages
Ign:3 file:/packages Packages
Get:4 file:/packages Translation-en
Ign:4 file:/packages Translation-en
Get:3 file:/packages Packages
Ign:3 file:/packages Packages
Get:4 file:/packages Translation-en
Ign:4 file:/packages Translation-en
Get:3 file:/packages Packages [7728 B]
Hit:5 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye InRelease
Hit:6 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/docker buster InRelease
Get:4 file:/packages Translation-en
Ign:4 file:/packages Translation-en
Hit:7 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/gluster bullseye InRelease
Hit:8 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/libnvidia bullseye InRelease
Hit:9 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/nvidia-container bullseye InRelease
Hit:10 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/nvidia-docker bullseye InRelease
Get:4 file:/packages Translation-en
Ign:4 file:/packages Translation-en
Get:4 file:/packages Translation-en
Ign:4 file:/packages Translation-en
Get:4 file:/packages Translation-en
Ign:4 file:/packages Translation-en
Hit:11 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/helm all InRelease
Hit:12 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian-security bullseye-security InRelease
Hit:13 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian-backports bullseye-backports InRelease
Hit:14 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian-debug bullseye-debug InRelease
Hit:15 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/nodejs bullseye InRelease
Hit:16 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/yarn stable InRelease
Hit:17 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/nvidia bullseye InRelease
Reading package lists...
Building dependency tree...
Reading state information...
1 package can be upgraded. Run 'apt list --upgradable' to see it.
W: Skipping acquire of configured file 'contrib/binary-amd64/Packages' as repository 'http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian-backports bullseye-backports InRelease' doesn't have the component 'contrib' (component misspelt in sources.list?)
W: Skipping acquire of configured file 'contrib/i18n/Translation-en' as repository 'http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian-backports bullseye-backports InRelease' doesn't have the component 'contrib' (component misspelt in sources.list?)
W: Skipping acquire of configured file 'non-free/binary-amd64/Packages' as repository 'http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian-backports bullseye-backports InRelease' doesn't have the component 'non-free' (component misspelt in sources.list?)
W: Skipping acquire of configured file 'non-free/i18n/Translation-en' as repository 'http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian-backports bullseye-backports InRelease' doesn't have the component 'non-free' (component misspelt in sources.list?)
Running predepcmd: 'apt install -y wget xz-utils'
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Reading package lists...
Building dependency tree...
Reading state information...
xz-utils is already the newest version (5.2.5-2.1~deb11u1).
xz-utils set to manually installed.
The following NEW packages will be installed:
wget
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 964 kB of archives.
After this operation, 3559 kB of additional disk space will be used.
Get:1 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye/main amd64 wget amd64 1.21-1+deb11u1 [964 kB]
Fetched 964 kB in 0s (29.5 MB/s)
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (2: No such file or directory)
Selecting previously unselected package wget.
(Reading database ... 31332 files and directories currently installed.)
Preparing to unpack .../wget_1.21-1+deb11u1_amd64.deb ...
Unpacking wget (1.21-1+deb11u1) ...
Setting up wget (1.21-1+deb11u1) ...
Processing triggers for man-db (2.9.4-2) ...
Running predepcmd: './pull.sh'
+ VERSION=7.2
+ REVISION=1
+ wget http://deb.debian.org/debian/pool/main/s/smartmontools/smartmontools_7.2-1.debian.tar.xz
--2023-10-11 19:21:22-- http://deb.debian.org/debian/pool/main/s/smartmontools/smartmontools_7.2-1.debian.tar.xz
Resolving deb.debian.org (deb.debian.org)... 199.232.34.132
Connecting to deb.debian.org (deb.debian.org)|199.232.34.132|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 38124 (37K) [application/x-xz]
Saving to: 'smartmontools_7.2-1.debian.tar.xz'
0K .......... .......... .......... ....... 100% 8.29M=0.004s
2023-10-11 19:21:22 (8.29 MB/s) - 'smartmontools_7.2-1.debian.tar.xz' saved [38124/38124]
+ tar xf smartmontools_7.2-1.debian.tar.xz
+ rm smartmontools_7.2-1.debian.tar.xz
+ wget http://deb.debian.org/debian/pool/main/s/smartmontools/smartmontools_7.2.orig.tar.xz
--2023-10-11 19:21:22-- http://deb.debian.org/debian/pool/main/s/smartmontools/smartmontools_7.2.orig.tar.xz
Resolving deb.debian.org (deb.debian.org)... 199.232.34.132
Connecting to deb.debian.org (deb.debian.org)|199.232.34.132|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 741068 (724K) [application/x-xz]
Saving to: 'smartmontools_7.2.orig.tar.xz'
0K .......... .......... .......... .......... .......... 6% 2.53M 0s
50K .......... .......... .......... .......... .......... 13% 3.92M 0s
100K .......... .......... .......... .......... .......... 20% 7.41M 0s
150K .......... .......... .......... .......... .......... 27% 13.8M 0s
200K .......... .......... .......... .......... .......... 34% 5.51M 0s
250K .......... .......... .......... .......... .......... 41% 22.1M 0s
300K .......... .......... .......... .......... .......... 48% 21.4M 0s
350K .......... .......... .......... .......... .......... 55% 28.9M 0s
400K .......... .......... .......... .......... .......... 62% 31.3M 0s
450K .......... .......... .......... .......... .......... 69% 9.57M 0s
500K .......... .......... .......... .......... .......... 75% 12.8M 0s
550K .......... .......... .......... .......... .......... 82% 44.8M 0s
600K .......... .......... .......... .......... .......... 89% 34.7M 0s
650K .......... .......... .......... .......... .......... 96% 45.1M 0s
700K .......... .......... ... 100% 42.6M=0.07s
2023-10-11 19:21:23 (9.88 MB/s) - 'smartmontools_7.2.orig.tar.xz' saved [741068/741068]
+ tar xf smartmontools_7.2.orig.tar.xz --strip 1
+ rm smartmontools_7.2.orig.tar.xz
+ cp extend-timeout.patch debian/patches
+ echo extend-timeout.patch
++ cat changelog
++ cat debian/changelog
+ echo -e 'smartmontools (7.99-2) unstable; urgency=medium
* Add custom TrueNAS patches
-- Vladimir Vinogradenko <vladimirv@ixsystems.com> Tue, 24 May 2022 15:17:00 +0200\n\nsmartmontools (7.2-1) unstable; urgency=medium
* New upstream release.
+ fixed failure with Micron 2200S NVME (Closes: #947803).
+ service: removed "StandardOutput=syslog" (Closes: #969048, #968168).
* smartd-runner: replaced "tmpfile" with "mktemp" (Closes: #969667)
Thanks, Bob Proulx.
* rules: don'\''t set INSTALL_PROGRAM and CFLAGS optimisation flags
(Closes: #968526).
Thanks, Simon McVittie.
* Install "drivedb.h" to "/usr/share/smartmontools" and copy it into
"/var/lib/smartmontools/drivedb/" in postinst (Closes: #976696).
Thanks, Paul Wise.
* Removed ancient workaround from postinst.
* Standards-Version: 4.5.0
* Rules-Requires-Root: no
-- Dmitry Smirnov <onlyjob@debian.org> Thu, 07 Jan 2021 20:47:11 +1100
smartmontools (7.1-1) unstable; urgency=medium
* New upstream release.
* rules: removed get-orig-source target.
* New patch to start daemon even on diskless system (Closes: #862908).
-- Dmitry Smirnov <onlyjob@debian.org> Sat, 04 Jan 2020 19:33:20 +1100
smartmontools (7.0-2) unstable; urgency=medium
* SysV: don'\''t (re)start daemon during upgrade (Closes: #942118).
* rules/configure: detect systemd automatically.
* Build-Depends:
= libsystemd-dev [!kfreebsd-any]
-- Dmitry Smirnov <onlyjob@debian.org> Fri, 11 Oct 2019 14:05:51 +1100
smartmontools (7.0-1) unstable; urgency=medium
[ Jean-Michel Vourgère ]
* Update README.Debian. (Closes: #878752).
[ Dmitry Smirnov ]
* New upstream release (Closes: #918535).
+ NVMe devices support (Closes: #911280).
+ no longer fails on nvme/Optane (Closes: #924892).
+ Type=notify for systemd service (Closes: #865912).
* Re-introduced "update-smart-drivedb", now with GPG validation;
(Closes: #894534, #824795, #804299, #854043, #824149).
* Removed obsolete "10powersave-notify" (Closes: #893646).
* Added note how to disable the service to README.Debian.
No longer use "start_smartd" in defaults. (Closes: #907736, #767569).
* Install smartd.service alias (Closes: #808987).
* DH & compat to version 12; rules to DH sequence.
* Pre-Depends: ${misc:Pre-Depends}
* Standards-Version: 4.4.1.
* In-depth copyright documentation.
* Build-Depends:
* automake1.11 --> automake (Closes: #865202).
+ pkg-config
+ libsystemd-dev
* Demoted MTA from Recommends to Suggests (Closes: #898121).
* Suggests += "curl | wget | lynx, gpg".
* Addressed some lintian warnings:
- maintainer-script-should-not-use-dpkg-maintscript-helper
- init.d-script-possible-missing-stop
* Added bug-presubj file with information about upstream bug tracker.
* watch: fixed and converted to v4; checking upstream signature.
* Replaced Giuseppe Iuculano as Maintainer by request of the MIA team
(Closes: #866838).
-- Dmitry Smirnov <onlyjob@debian.org> Thu, 10 Oct 2019 12:39:16 +1100
smartmontools (6.6-1) unstable; urgency=medium
[ Jonathan Dowland ]
* Update Vcs-* headers in control file: replace Alioth/anonscm URIs
with salsa.debian.org.
* new upstream version. Closes: #889033.
Patches refreshed:
- 61_cciss-doc.patch
Patches removed:
- 50_manpage_improvements.diff
- 3w-sas (merged by upstream)
- 60_remove-redhatism.diff (removed by upstream)
[ SZ Lin (林上智) ]
Patches refreshed:
- 52_remove-pragma.diff
- 53_use-smartd-runner-by-default.diff
- 54_remove-Id-from-smartd.conf.diff
- 61_cciss-doc.patch
- 63_removable.patch
- kfreebsd.patch
- manpage.diff
- removesyslogtarget.patch
[ Jonathan Dowland ]
* Bump debhelper dependency to 11, remove dh-systemd (deprecated)
in favour of dh_installsystemd
-- Jonathan Dowland <jmtd@debian.org> Mon, 15 Oct 2018 21:03:35 +0100
smartmontools (6.5+svn4324-1) unstable; urgency=low
* [a86ec89] Imported Upstream version 6.5+svn43204 (Closes: #831504)
-- Giuseppe Iuculano <iuculano@debian.org> Sat, 30 Jul 2016 19:10:13 +0200
smartmontools (6.4+svn4214-1) unstable; urgency=medium
[ Helmut Grohne ]
* Fix FTCBFS. (Closes: #794035)
+ Pass --build and --host to configure
[ Tobias Frost ]
* Import patch from Helmut (see above)
* Remove '\''/var/lib/smartmontools'\'' on purge (Closes: #766145)
* Fixed postinst script: Version is only valid when configuring.
(Closes: #766146)
[ Jonathan Dowland ]
* Portability improvements, thanks Robert Millan. Closes: #634506.
* Update debian/copyright to Format 1.0., resolve GPL-2/GPL-2+
ambiguity. Closes: #777583.
* Get rid of update-smart-drivedb. Closes: #783317, #804299, #706909.
* Bump standards version (no further changes required)
* Enhance rules clean target to make repeated builds easier
* Stop installing duplicate/irrelevant docs (COPYING, changelog, INSTALL)
* add '\''set -e'\'' to postrm.
* Switch to xz for orig.tar compression and update get-orig-source rule.
* Stop passing explicit runlevels to dh_installinit. Closes: #732045.
* Remove duplicate use of dh_systemd_enable: The second one should have
been dh_systemd_start. Closes: #813102.
* Various manpage improvements. Thanks Bjarni Ingi Gislason.
Closes: #669053.
-- Jonathan Dowland <jmtd@debian.org> Thu, 04 Feb 2016 23:21:58 +0000
smartmontools (6.4+svn4109-1) unstable; urgency=medium
* New upstream version. Closes: #789721.
* Add myself to uploaders.
* refresh 54_remove-Id-from-smartd.conf.diff and 61_cciss-doc.patch
-- Jonathan Dowland <jmtd@debian.org> Wed, 18 Nov 2015 19:52:41 +0000
smartmontools (6.3+svn4002-2) unstable; urgency=low
* [12d5f9d] Correct maintscript syntax (Closes: #766178)
-- Giuseppe Iuculano <iuculano@debian.org> Tue, 21 Oct 2014 13:30:40 +0200
smartmontools (6.3+svn4002-1) unstable; urgency=low
* [03a62f0] Set EnvironmentFile=-/etc/default/smartmontools in smartd.service
(Closes: #764136)
* [59c55ae] Remove /etc/smartd_warning.sh (Closes: #765519)
* [1d06b80] Imported Upstream version 6.3+svn4002
* [1aabc0a] Do not build-depends on hardening-wrapper,
instead use the new buildflags.mk file
-- Giuseppe Iuculano <iuculano@debian.org> Fri, 17 Oct 2014 15:55:45 +0200
smartmontools (6.3+svn3990-1) unstable; urgency=low
* [d2e702c] Imported Upstream version 6.3+svn3990
- Support for TOSHIBA STOR.E Plus 2 TB (0x0480:0xa00a) (Closes: #734395)
* [901fe9c] Refreshed patches
* [9804b75] Included systemd service file.
Thanks to Michael Stapelberg (Closes: #639631, #757973, #762039)
* [a64e022] Remove the obsolete bug helper (Closes: #757975)
* [3478a98] moved smartd_warning.sh in
/usr/share/smartmontools/smard_warning.sh (Closes: #710815)
* [a5a9d5b] Removed source less os_solaris_ata.s (Closes: #729842)
* [fb337c9] Update to Standards-Version 3.9.5, no changes need
* [6a8e2b9] smartd.service.in: declaring After=syslog.target is unnecessary
by now because syslog is socket-activated and will therefore be started
when needed
-- Giuseppe Iuculano <iuculano@debian.org> Sun, 05 Oct 2014 10:58:13 +0200
smartmontools (6.2+svn3841-1.2) unstable; urgency=medium
* Non-maintainer upload.
* debian/control: Switch to automake1.11. (Closes: #724436)
-- Eric Dorland <eric@debian.org> Sun, 16 Feb 2014 16:27:11 -0500
smartmontools (6.2+svn3841-1.1) unstable; urgency=medium
* Non-maintainer upload.
* Fix FTBFS on GNU/kFreeBSD. (Closes: #736660)
-- Robert Millan <rmh@debian.org> Thu, 06 Feb 2014 13:48:48 +0100
smartmontools (6.2+svn3841-1) unstable; urgency=low
* [3d17a85] Imported Upstream version 6.2+svn3841
* [8251afb] Fix FTBFS[kfreebsd]
Thanks to Christoph Egger (Closes: #717567)
* [e57fafb] Refreshed patches
-- Giuseppe Iuculano <iuculano@debian.org> Thu, 05 Sep 2013 14:53:36 +0200
smartmontools (6.1+svn3812-1) unstable; urgency=low
* [ee38a43] Imported Upstream version 6.1+svn3812 (Closes: #691646)
- Support for WD MyBook Essential 0x1058:0x0910 (Closes: #633724)
- Added USB bridge to known IDs (Closes: #643928)
- Added support for Seagate Expansion Desk external (usb) disks
(Closes: #621411)
* [1855d63] Refreshed patches and removed patches applied upstream
* [d3fc9d1] Remove quilt from depends
* [841c1a8] CHANGELOG file has been renamed, install Changelog
* [3502e16] Updated VCS control fields
* [8f14e44] debian/rules: Provide build-arch and build-indep
* [0f1c16c] Harden smartmontools binaries
* [555346e] Bump to 3.9.4 standards version
* [5ae3fa9] Use /var/lib/smartmontools/drivedb for drivedb.h updates
(Closes: #706909)
* [c16ffdc] Create /var/lib/smartmontools/drivedb dir
* [79a3dc2] Trigger the removal of /etc/init.d/smartd when upgrading
(Closes: #684617, #704081)
* [a0a5725] Also remove /etc/init.d/smartd in preinst script
* [a26a490] Added man page for update-smart-drivedb.
Thanks to Hannes von Haugwitz (Closes: #708433)
-- Giuseppe Iuculano <iuculano@debian.org> Sun, 02 Jun 2013 11:14:02 +0200
smartmontools (5.42+svn3561-3) unstable; urgency=high
* [f10872d] Really fix FTBFS on kfreebsd.
Thanks to Petr Salinger (Closes: #677393)
-- Giuseppe Iuculano <iuculano@debian.org> Mon, 16 Jul 2012 15:21:56 +0200
smartmontools (5.42+svn3561-2) unstable; urgency=high
* [743e0f4] Fixed FTBFS in kfreebsd.
Thanks to Petr Salinger (Closes: #677393)
-- Giuseppe Iuculano <iuculano@debian.org> Mon, 16 Jul 2012 12:06:15 +0200
smartmontools (5.42+svn3561-1) unstable; urgency=low
* [f4e463d] Imported Upstream version 5.42+svn3561
* [23f7a2f] Refreshed patches
* [16216c8] Fixed FTBFS on kfreebsd.
Thanks to Petr Salinger (Closes: #676142)
* [6652700] Fixed regression introduced in 10mail script (Closes: #649515)
* [fd647e5] Remove /etc/init.d/smartd (Closes: #677095)
-- Giuseppe Iuculano <iuculano@debian.org> Wed, 20 Jun 2012 16:36:24 +0200
smartmontools (5.42+svn3539-1) unstable; urgency=low
* [e165493] Imported Upstream version 5.42+svn3539
(Closes: #668391, #608953)
* [9fcd449] Refreshed patches
* [65c801f] Do not install upstream init (Closes: #631075)
* [9a19418] Fixed check for /usr/bin/mail.
Thanks to Martin von Gagern (Closes: #649515)
-- Giuseppe Iuculano <iuculano@debian.org> Sat, 12 May 2012 13:02:49 +0200
smartmontools (5.41+svn3365-1) unstable; urgency=low
* [a7e8ffe] Imported Upstream version 5.41+svn3365
* [471d14a] Refreshed patches, removed install.diff applied upstream
* [fae0ec9] Added a missing include for hurd-i386.
Thanks to Pino Toscano (Closes: #619208)
-- Giuseppe Iuculano <iuculano@debian.org> Sun, 19 Jun 2011 17:28:10 +0200
smartmontools (5.40+svn3296-1) unstable; urgency=low
* [cfbba5b] Imported Upstream version 5.40+svn3296
- Intel X18-M/X25-M/X25-V G2 SSDs: Add firmware bug warning
(Closes: #581996)
- handles missing attributes and prints attributes of SandForce based SSDs
correctly (Closes: #601258)
- Added a note about smartctl is unable to print a warning if autosave is
disabled (Closes: 570892)
- Print help message if no option is specified (Closes: 435579)
- Only some of the controller specific parts of the code may still use the
old ioctl (LP: #658469)
- New drive database entry for F4EG (LP: #684809)
* [b5b85ba] Refreshed patches
* [2b7f0f1] Update to Standards-Version 3.9.1, no changes needed
* [3ed7206] debian/rules: remove make -C examplescripts
* [f8250f3] Pass exampledir in configure
* [0711e68] Install examples files and update-smart-drivedb (Closes: #607689)
(Closes: #593502)
* [f36e375] Do not install CHANGELOG COPYING INSTALL and initd files
* [a76819a] Re-enabled capability-dropping on armel (Closes: #552044)
-- Giuseppe Iuculano <iuculano@debian.org> Sun, 20 Mar 2011 19:09:39 +0100
smartmontools (5.39.1+svn3124-2) unstable; urgency=low
[ Florian Weimer ]
* [88b6d44] 3w-sas support (from upstream changeset r3128) (Closes:
#604016)
-- Giuseppe Iuculano <iuculano@debian.org> Sun, 26 Dec 2010 12:26:16 +0100
smartmontools (5.39.1+svn3124-1) unstable; urgency=low
* [1e46e09] Set state and attribute file directory to
/var/lib/smartmontools/ (Closes: #582158)
* [e20147c] Don'\''t warn about being disabled unless verbose (Closes: #583386)
* [3390c07] Fixed example path in man pages (Closes: #588134)
* [e9583e0] Imported Upstream version 5.39.1+svn3124
* [789e123] Refreshed patches
* [cbecf14] Bump to Standards-Version 3.9.0, no changes needed
-- Giuseppe Iuculano <iuculano@debian.org> Tue, 13 Jul 2010 13:16:54 +0200
smartmontools (5.39.1+svn3077-1) unstable; urgency=low
* [ffe62ea] Removed powersaved from Suggests (Closes: #570956)
* [7f0798e] Imported Upstream version 5.39.1+svn3077 (Closes: #575435)
* [b1b3452] Enabled drivedb, savestates, and attributelog
* [9f28fd4] Switch to dpkg-source 3.0 (quilt) format
* [52be6ce] Updated to Standards-Version 3.8.4, no changes needed
-- Giuseppe Iuculano <iuculano@debian.org> Fri, 26 Mar 2010 22:01:58 +0100
smartmontools (5.39.1+svn3060-1) unstable; urgency=low
* [a23d511] Imported Upstream version 5.39.1+svn3060
- A regression caused by capabilities was fixed. (Closes: #564876)
* [89c9890] Removed patches merged in upstream
-- Giuseppe Iuculano <iuculano@debian.org> Thu, 04 Feb 2010 08:16:37 +0100
smartmontools (5.39-3) unstable; urgency=low
* [3d32778] Fixed quietmode option (Closes: #545784)
* [e66f4fd] Allow smartd '\''DEVICESCAN -d sat'\'' (Closes: #546566)
-- Giuseppe Iuculano <iuculano@debian.org> Fri, 22 Jan 2010 20:02:53 +0100
smartmontools (5.39-2) unstable; urgency=low
* [f7f4c51] Fixed crash on kfreebsd. (Closes: #561113) - thanks to
Petr Salinger and Axel Beckert
-- Giuseppe Iuculano <iuculano@debian.org> Sat, 26 Dec 2009 11:11:58 +0100
smartmontools (5.39-1) unstable; urgency=low
* [e9e8c2b] Imported Upstream version 5.39
* [b00706e] Adeed libusb2-dev for kfreebsd in Build-Depends.
(Closes: #560241)
-- Giuseppe Iuculano <iuculano@debian.org> Mon, 14 Dec 2009 12:24:35 +0100
smartmontools (5.38+svn2993-1) unstable; urgency=low
* [bed9426] Imported Upstream version 5.38+svn2993
* [4a5d1d1] Fixed status action in init script (LP: #491324)
* [9dd2a1d] Add selinux for avr32 in build-depends
* [26ec4bc] Refreshed patches
-- Giuseppe Iuculano <iuculano@debian.org> Wed, 09 Dec 2009 17:45:19 +0100
smartmontools (5.38+svn2956-1) unstable; urgency=low
* [283f281] Updated my email address and removed DM-Upload-Allowed
control field
* [eb07ddf] Imported Upstream version 5.38+svn2956
+ Added a note in smartctl (8) about 2^16 wrap of LifeTime value in
Self-test log. (Closes: #535298)
* [ed382e8] Refreshed patches
* [f4ff277] Updated lowcap patch, make capabilities optional and
clarify that mail notification could not work when used. (Closes:
#544940)
* [a7e19a3] Do not Build-depends in libcap-ng-dev in armel, libcap-ng
is broken in this arch. (Closes: #548438)
-- Giuseppe Iuculano <iuculano@debian.org> Sun, 11 Oct 2009 09:42:47 +0200
smartmontools (5.38+svn2920-2) unstable; urgency=low
* [a117ede] Enable Selinux only in linux platforms
-- Giuseppe Iuculano <giuseppe@iuculano.it> Tue, 22 Sep 2009 13:22:39 +0200
smartmontools (5.38+svn2920-1) unstable; urgency=low
* [a94eb83] run.d/10mail: Do not exit silently if /usr/bin/mail is
missing (Closes: #541192) - thanks to Francesco Potorti`
* [0197215] Enabled SELinux support
* [091eb3a] debian/smartmontools-bug: Fixed a spelling error (Closes:
#547197) - thanks to Sandro Tosi
* [5496574] Imported Upstream version 5.38+svn2920
* [5d593fa] Removed patches merged in upstream: 64_r2898.patch,
65_freebsd.patch
-- Giuseppe Iuculano <giuseppe@iuculano.it> Sun, 20 Sep 2009 14:51:52 +0200
smartmontools (5.38+svn2879-4) unstable; urgency=low
* [af11f9b] debian/patches/65_freebsd.patch: The os_freebsd.cpp uses
reallocf(), which is specific for *BSD libc. Added an implementation
directly into os_freebsd.cpp - thanks to Petr Salinger
* [b2a680f] debian/watch: Removed uupdate
* [4fe54cf] Do not Build-depends on libcap-ng-dev on avr32
-- Giuseppe Iuculano <giuseppe@iuculano.it> Mon, 07 Sep 2009 20:55:53 +0200
smartmontools (5.38+svn2879-3) unstable; urgency=low
* [1b75411] Freebsd patch was not entirely merged in upstream. Applied
remaining changes and try to fix FTBFS on GNU/kFreeBSD (Closes: #537856)
-- Giuseppe Iuculano <giuseppe@iuculano.it> Mon, 07 Sep 2009 15:33:34 +0200
smartmontools (5.38+svn2879-2) unstable; urgency=low
* [51c0fd9] Build-depends on libcap-ng-dev only on linux. - thanks to
Petr Salinger
* [94843b0] Fixed Vcs-Browser field
* [c2d3bf4] Do not Build-depends on libcap-ng-dev on sparc
* [27a32a3] Dereference '\''/dev/disk/by-*/*'\'' symlink before device type
autodetection. (Closes: #544823)
-- Giuseppe Iuculano <giuseppe@iuculano.it> Mon, 07 Sep 2009 14:24:17 +0200
smartmontools (5.38+svn2879-1) unstable; urgency=low
[ Guido Günther ]
* [d5c8d71] suggest graphical helpers (Closes: #524752)
* [b11b96e] support status action in init script (Closes: #525196) -
thanks to Peter Eisentraut
* [b092558] fix Vcs-Browser URL
[ Giuseppe Iuculano ]
* [101b745] New maintainers, thanks to Guido Günther for the prior
work on smartmontools. (Closes: #543861)
* [35bece3] debian/rules: Added a get-orig-source target to retrieve a
svn snapshot
* [4482c05] Bump to debhelper 7 compatibility levels
* [2127e19] Imported Upstream version 5.38+svn2879
- Fixed FTBFS (Closes: #539430)
- GNU/kFreeBSD patches merged in upstream (Closes: #537856)
- More drives recognized: Fujitsu MHW2 BJ series, WD Caviar Black family,
Western Digital AV-GP series, Transcend Solid-State Drive and Transcend
Solid-State Drive V series, Seagate Momentus 5400.5 series.
* [6052436] Refreshed patches
* [91ad575] move badblockhowto.html in debian/ (Closes: #538631)
* [bbdf8c9] debian/control: Depend on lsb >= 3.2-14, which has the
status_of_proc() function.
* [9afe5af] Removed stop links from rc0 and rc6 (Closes: #494951) -
thanks to James Westby
* [6dcd8ec] Updated to standards version 3.8.3 (No changes needed)
* [608687b] debian/rules: Use dh_prep instead of dh_clean -k
* [a52f90d] debian/rules: Do not ignore make clean errors
* [31e40f7] debian/rules: use dh_install to install files
* [9ca7a79] debian/control: Added Florian Maier in Uploaders, fixed
VCS field, added DM-Upload-Allowed field
* [d494f00] Updated debian/badblockhowto.html (Closes: #540359) -
thanks to Francesco Potorti`
* [3db595a] Use the `-n standby'\'' option by default in smartd.conf
(Closes: #531325)
* [52b4501] Added /etc/smartmontools/run.d/10powersave-notify to
enable desktop notification over powersave-notify and added
powersaved in Recommends
* [0dcf301] debian/patches/62_lowcap.patch: Drop all unnecessary
capabilities
* [5afdd10] Added the removable option by default. This indicates to
smartd that it should continue if the device does not appear to be
present when smartd is started. (Closes: #406130)
-- Giuseppe Iuculano <giuseppe@iuculano.it> Tue, 01 Sep 2009 12:59:13 +0200
smartmontools (5.38-3) unstable; urgency=low
* [3ea288e] add Homepage, Vcs-{Git,Browser} fields (Closes: #500530)
* [76a9163] check if daemon is running befor starting it (Closes: #516430)
* [8a3e8a3] fix maintainer name
-- Guido Günther <agx@sigxcpu.org> Sat, 21 Feb 2009 17:19:19 +0100
smartmontools (5.38-2) unstable; urgency=low
* [fd9c675] add lintian override Full stop at end of synopsis is OK -
it doesn'\''t end a sentence but is part of an abbreviation.
* [fab76b4] update copyright
* [1731d9e] bump standards version
* [d0f2f2e] add README.source
* [2d3e4b9] new patch 61_cciss-doc.patch update ccis examples/docs
(Closes: #488371) - thanks to Matt Taggart
-- Guido Guenther <agx@sigxcpu.org> Thu, 24 Jul 2008 12:15:34 -0400
smartmontools (5.38-1) unstable; urgency=low
* new upstream version
* drop 51_add-kfreebsd-support.diff, applied upstream
* add watch file from dehs.debian.org
-- Guido Guenther <agx@sigxcpu.org> Tue, 11 Mar 2008 20:54:41 +0100
smartmontools (5.38~rc0-2) unstable; urgency=low
[ Petter Reinholdtsen ]
* smartmontools: Problem with LSB header in init.d script (Closes:
Bug#469377)
-- Guido Guenther <agx@sigxcpu.org> Wed, 05 Mar 2008 08:55:46 +0100
smartmontools (5.38~rc0-1) unstable; urgency=low
* New Upstream Version release candidate
* detects Hitachi drives with newer kernels (Closes: #314629)
* updated drives table (Closes: #381251)
* correct logfile location (Closes: #464193)
* drop 01_sat-error-handling.diff - originally pulld from upstream
* drop 05_wait-for-daemon-startup.diff - applied upstream
* refresh 51_add-kfreebsd-support.diff
* bump standards version
* ship badblockshowto.html (Closes: #454565)
-- Guido Guenther <agx@sigxcpu.org> Tue, 26 Feb 2008 11:59:50 +0100
smartmontools (5.38~cvs20071118-2) experimental; urgency=low
* add LSB header (Closes: #458391)
* move debian specific patches to >= 50
* pull 01_sat-error-handling.diff from upstream CVS to improve SAT
handling of aborted ATA commands - thanks to Doug Gilbert!
-- Guido Guenther <agx@sigxcpu.org> Sun, 09 Dec 2007 14:51:57 +0100
smartmontools (5.38~cvs20071118-1) experimental; urgency=low
* new upstream CVS snapshot 20071118
* update patches:
* rework 01_add-kfreebsd-support.diff to apply again
* rework 05_wait-for-daemon-startup.diff to apply again
* rediff 10_remove-redhatism.diff
* drop 20_fix-scsi-disk-detection.diff - merged upstream
* drop 30_gcc4.3.diff - fixed upstream
* drop 40_fix-sata-hsm-violation.diff - pulled from upstream
-- Guido Guenther <agx@sigxcpu.org> Mon, 19 Nov 2007 13:54:42 +0100
smartmontools (5.37-6) unstable; urgency=low
* don'\''t redefine CISS_MAX_LUN (Closes: #441598)
* Patch pulled from upstream to fix HSM violation errors on SATA systems
(Closes: #448781) - thanks to Sven Hartge for sorting this out
-- Guido Guenther <agx@sigxcpu.org> Thu, 01 Nov 2007 13:29:11 +0100
smartmontools (5.37-5) unstable; urgency=low
* NEWS.Debian: SCSI disks need -W for temperature logging, thanks to GSR for
feedback and testing. (Closes: #411932)
-- Guido Guenther <agx@sigxcpu.org> Thu, 05 Apr 2007 10:15:52 +0200
smartmontools (5.37-4) unstable; urgency=low
* 05_wait-for-daemon-startup.diff: fix startup race condition (Closes: #246032)
* document good testing practice (Closes: #412543)
-- Guido Guenther <agx@sigxcpu.org> Sat, 31 Mar 2007 16:01:27 +0200
smartmontools (5.37-3) unstable; urgency=low
* rebuild with pbuilder (Closes: #415950)
-- Guido Guenther <agx@sigxcpu.org> Fri, 23 Mar 2007 13:51:43 +0100
smartmontools (5.37-2) unstable; urgency=low
* switch from dpatch to quilt
* 20_fix-scsi-disk-detection.diff: patch from Douglas Gilbert to fix scsi
disk detection (Closes: #411932)
-- Guido Guenther <agx@sigxcpu.org> Mon, 19 Mar 2007 23:04:15 +0100
smartmontools (5.37-1) unstable; urgency=low
* New Upstream Version
* adjusted 04_remove-Id-from-smartd.conf.dpatch
-- Guido Guenther <agx@sigxcpu.org> Thu, 21 Dec 2006 13:12:26 +0100
smartmontools (5.37~cvs20061111-1) experimental; urgency=low
* The No Narro ihr Mäschkerle release
* New upstream cvs release candidate (Closes: #398055, #398054, #391999)
* dropped 60_cciss.dpatch, merged upstream
* adjusted 04_remove-Id-from-smartd.conf.dpatch
-- Guido Guenther <agx@sigxcpu.org> Sat, 11 Nov 2006 19:19:27 +0100
smartmontools (5.37~cvs20061002-1) experimental; urgency=low
* New upstream CVS release candidate
* adjusted patches: 60_cciss, 04_remove-Id-from-smartd.conf
-- Guido Guenther <agx@sigxcpu.org> Mon, 2 Oct 2006 17:45:51 +0200
smartmontools (5.36-8) unstable; urgency=low
* 60_cciss (smartd.c): make sure we pass the correct mode and device
parameters to the lower level functions (the code assumed "SCSI" in those
places although it was "CCISS"). Patch by Frédéric BOITEUX
<fboiteux@calistel.com>, thanks a lot! (Closes: #36802)
-- Guido Guenther <agx@sigxcpu.org> Fri, 29 Sep 2006 15:22:19 +0200
smartmontools (5.36-7) unstable; urgency=low
* README.Debian: actually mention the term "smartd-runner" in README.Debian
instead of only explaining what it does
* /etc/init.d/smartmontools: use LSB logging, patch by David Härdeman
<david@hardeman.nu> (Closes: #385903)
* Bump standards version to 3.7.2 (no other changes necessary)
-- Guido Guenther <agx@sigxcpu.org> Mon, 25 Sep 2006 11:41:21 +0200
smartmontools (5.36-6) unstable; urgency=low
* Explicitly discourage using enable_smart with SATA disks in README.Debian
(Closes: #365027) - many thanks to Francois Marier and Doug Gilbert for
their feedback and help.
* Document what smartd-runner really does (Closes: #352244)
-- Guido Guenther <agx@sigxcpu.org> Wed, 3 May 2006 21:44:01 +0200
smartmontools (5.36-5) unstable; urgency=low
* apply current version of the cciss patch, updated to be less intrusive
by Douglas Gilbert
-- Guido Guenther <agx@sigxcpu.org> Wed, 26 Apr 2006 23:10:07 +0200
smartmontools (5.36-4) unstable; urgency=low
* really apply the cciss patch, thanks again to Frederic Boiteux
* adjust the cciss patch to include <linux/cciss.h> instead of
"cciss.h", we don'\''t ship a local copy.
-- Guido Guenther <agx@sigxcpu.org> Tue, 25 Apr 2006 13:54:17 +0200
smartmontools (5.36-3) unstable; urgency=low
* depend on debianutils (>= 2.2) for run-parts --lsbsysinit, thanks to
Frederic Boiteux (Closes: #364713)
-- Guido Guenther <agx@sigxcpu.org> Tue, 25 Apr 2006 10:59:37 +0200
smartmontools (5.36-2) unstable; urgency=low
* Build depend on automake/autoconf since we run autogen.sh
from debian/rules
-- Guido Guenther <agx@sigxcpu.org> Mon, 24 Apr 2006 16:02:42 +0200
smartmontools (5.36-1) unstable; urgency=low
* new upstream version (Closes: #363087)
* use dpatch
* bump standards version
* update cciss patch
-- Guido Guenther <agx@sigxcpu.org> Mon, 24 Apr 2006 14:39:19 +0200
smartmontools (5.33+5.34cvs20050802-6) experimental; urgency=low
* update cciss patch to also support smartd not only smartctl
-- Guido Guenther <agx@debian.org> Thu, 13 Apr 2006 09:34:39 +0200
smartmontools (5.33+5.34cvs20050802-5) experimental; urgency=low
* add (experimental) cciss patch by Praveen Chidambaram
<bunchofmails@gmail.com>, with slight modfifications to apply and work
with current CVS
* Build depend on libcam-dev for kfreebsd-amd64 too (Closes: #361478)
* Remove $Id$ from smartd.conf (Closes: #324703)
-- Guido Guenther <agx@debian.org> Mon, 10 Apr 2006 17:33:18 +0200
smartmontools (5.33+5.34cvs20050802-4) unstable; urgency=low
* avoid usage of cat in 10mail (Closes: #327338)
* add patch by Aurelin Jano to build on kfreebsd (Closes: #327642)
-- Guido Guenther <agx@debian.org> Tue, 24 Jan 2006 09:56:28 +0100
smartmontools (5.33+5.34cvs20050802-3) unstable; urgency=low
* add note about 3ware raid controlers to NEWS.Debian (Closes: #322265)
-- Guido Guenther <agx@debian.org> Thu, 11 Aug 2005 11:04:56 +0200
smartmontools (5.33+5.34cvs20050802-2) unstable; urgency=low
* rules: make ./configure executable (Closes: #321060)
* smartd.conf: add smartd-runner to the default DEVICESCAN directive
* README.Debian: mention smartd-runner
* control: remove debianutils, it'\''s an essential package
-- Guido Guenther <agx@debian.org> Wed, 3 Aug 2005 11:32:53 +0200
smartmontools (5.33+5.34cvs20050802-1) unstable; urgency=low
* New CVS snapshot as of 2005-08-02 (Closes: #269051)
* added smartd-runner which runs scripts in /etc/smartmontools/run.d
* added /etc/smartmontools/run.d/10mail to emulate smartd'\''s -m option
* add a comment on howto use this to /etc/smartd.conf
* Many thanks for this go to Brian Sutherland <jinty@web.de>
-- Guido Guenther <agx@debian.org> Tue, 2 Aug 2005 20:58:47 +0200
smartmontools (5.33-1) experimental; urgency=low
* new upstream version
* upload to experimental since we want 5.32 in sarge for now
-- Guido Guenther <agx@debian.org> Sat, 20 Nov 2004 19:52:39 +0100
smartmontools (5.32-2) unstable; urgency=medium
* urgency medium since the sarge version is unusable on arm
* use __attribute__((packed)) instead of #pragma(packed) since the later
causes alignment problems on arm - based on a patch by armcc@lycos.com,
many thanks! (Closes: #278459)
* simplify /usr/share/bug/smartmontools a bit (Closes: #262055)
-- Guido Guenther <agx@debian.org> Thu, 28 Oct 2004 09:20:57 +0200
smartmontools (5.32-1) unstable; urgency=low
* new upstream version
-- Guido Guenther <agx@debian.org> Mon, 19 Jul 2004 10:57:53 +0200
smartmontools (5.30-6) unstable; urgency=low
* be more verbose in /etc/init.d/smartmontools iff smartd has been disabled
via /etc/default/smartmontools (Closes: #246615)
* explain removal of cron selftests in NEWS.Debian (Closes: #247622)
-- Guido Guenther <agx@debian.org> Thu, 6 May 2004 09:05:40 +0200
smartmontools (5.30-5) unstable; urgency=low
* rm selftests from CVS, so they don'\''t get picked up by cvs-buildpackage
(Closes: #242580), sigh
* thanks again to Jean-Luc Coulon and Bruce Allen for resolving #208964
-- Guido Guenther <agx@debian.org> Wed, 7 Apr 2004 19:07:58 +0200
smartmontools (5.30-4) unstable; urgency=low
* improve restart in init.d script so that smartd can shut down
properly (Closes: #242344)
* remove cron selftests at all, use smartd'\''s -s option instead
-- Guido Guenther <agx@debian.org> Tue, 6 Apr 2004 12:18:52 +0200
smartmontools (5.30-3) unstable; urgency=low
* deprecated cron selftests, this is now better handled by smartd'\''s "-s"
option
* check for existence of smartmontools-selftests in cron.d snippet
* in accordance with upstream (who adopted our naming scheme) use smartd'\''s
compiled in default values in /etc/default/smartmontools
-- Guido Guenther <agx@debian.org> Sat, 27 Mar 2004 07:11:12 +0100
smartmontools (5.30-2) unstable; urgency=low
* clarify usage of enable_smart in (Closes: #239737)
* add reload to /etc/init.d/smartmontools
-- Guido Guenther <agx@debian.org> Thu, 25 Mar 2004 14:43:33 +0100
smartmontools (5.30-1) unstable; urgency=low
* new upstream version (Closes: #238790)
* logging severity fixed upstream (Closes: #234519)
-- Guido Guenther <agx@debian.org> Tue, 23 Mar 2004 00:40:25 +0100
smartmontools (5.26-5) unstable; urgency=low
* install /u/s/bug/smartmontools as reportbug helper
* use install instead of cp/chmod
* remove no longer needed debian/dirs
-- Guido Guenther <agx@debian.org> Wed, 11 Feb 2004 19:08:49 +0100
smartmontools (5.26-4) unstable; urgency=low
* remove sections not relevant on debian systems from smartd.8.in manpage
* include /etc/smartd.conf again, thanks Wolfram Quester.
* change smartd.conf to only use DEVICESCAN
-- Guido Guenther <agx@debian.org> Tue, 3 Feb 2004 15:25:32 +0100
smartmontools (5.26-3) unstable; urgency=low
* The "where did the chmod go" release
* make sure selftests is executable (Closes: #223627)
-- Guido Guenther <agx@debian.org> Thu, 11 Dec 2003 12:33:56 +0100
smartmontools (5.26-2) unstable; urgency=low
* actually include /usr/share/smartmontools/selftests again
-- Guido Guenther <agx@debian.org> Tue, 9 Dec 2003 12:45:22 +0100
smartmontools (5.26-1) unstable; urgency=low
* new upstream version
-- Guido Guenther <agx@debian.org> Fri, 5 Dec 2003 22:12:33 +0100
smartmontools (5.1.18-3) unstable; urgency=low
* make sure /usr/share/smartmontools/selftests is executable
-- Guido Guenther <agx@debian.org> Wed, 12 Nov 2003 01:08:20 +0100
smartmontools (5.1.18-2) unstable; urgency=low
* Conflict: ucsc-smartsuite (Closes: #218573)
* introduce run_cron_selftests in /etc/defaults/smartmontools which
contains a list of devices to run regular selftests on via cron
-- Guido Guenther <agx@debian.org> Mon, 3 Nov 2003 22:36:34 +0100
smartmontools (5.1.18-1) unstable; urgency=low
* new upstream version
* bump Standards-Version to 3.6.1
-- Guido Guenther <agx@debian.org> Thu, 28 Aug 2003 21:54:06 +0200
smartmontools (5.1.16-1) unstable; urgency=low
* new upstream version
- log normal exit at LOG_INFO, not LOG_CRIT (Closes: #201173)
- allows to acces disks behind 3ware RAID controllers, maybe
closes: #188515, the submitter never specified any details.
* bump Standards-Version to 3.6.0
* add NEWS.Debian file
-- Guido Guenther <agx@debian.org> Thu, 7 Aug 2003 13:54:26 +0200
smartmontools (5.1.14-1) unstable; urgency=low
* new upstream version
* fix the regexp in smartmontools-cron matching the first disk only
* bump Standards-Version to 3.5.10
-- Guido Guenther <agx@debian.org> Sun, 22 Jun 2003 14:07:11 +0200
smartmontools (5.1.11-1) unstable; urgency=low
* new upstream version (Closes: #191831)
* rework debian/rules since we can now pass most of the
needed options to the Makefile
-- Guido Guenther <agx@debian.org> Wed, 7 May 2003 21:43:53 +0200
smartmontools (5.1.10-1) unstable; urgency=low
* new upstream version (Closes: #186213)
* add ${misc:Depends} to control file
* bump debhelper Build-Depends to >=4
* bump Standards-Version to 3.5.9
* smartd now writes a pidfile, use it in the init script
* add smartd_opts to /etc/defaults/smartmontools
* add cron.daily example
-- Guido Guenther <agx@debian.org> Mon, 21 Apr 2003 19:32:46 +0200
smartmontools (5.1.9-3) unstable; urgency=low
* init.d script prints more sensible error messages (Closes: #187697)
-- Guido Guenther <agx@debian.org> Sat, 5 Apr 2003 19:17:43 +0200
smartmontools (5.1.9-2) unstable; urgency=low
* /etc/init.d/smartmontools cleanup:
- Don'\''t fail when the package was removed but not purged
(Closes: #186091).
- sleep 1 second on restart
- fix wrong scriptname in usage output
* install smartd.conf to /etc
* adjust README.Debian
* don'\''t install CHANGELOG, dh_installchangelogs handles this for us
-- Guido Guenther <agx@debian.org> Mon, 24 Mar 2003 19:24:53 +0100
smartmontools (5.1.9-1) unstable; urgency=low
* new upstream version (Closes: #178151)
* Recommends: mailx | mailutils (Closes: #184890)
* add '\''-e'\'' to shebang line of init script
* use debian/compat not DH_COMPAT
-- Guido Guenther <agx@debian.org> Sat, 15 Mar 2003 12:40:04 +0100
smartmontools (5.1.4-2) unstable; urgency=low
* remove '\''function'\'' bashism from initscript (Closes: #178411),
Thanks Martin Waitz.
-- Guido Guenther <agx@debian.org> Sun, 26 Jan 2003 00:52:49 +0100
smartmontools (5.1.4-1) unstable; urgency=low
* new upstream version
* turn on S.M.A.R.T. for devices listed in enable_smart
* honor DEB_BUILD_OPTIONS
* bump standards version to 3.5.8
-- Guido Guenther <agx@debian.org> Sat, 25 Jan 2003 19:40:14 +0100
smartmontools (5.1.1-3) unstable; urgency=low
* conflict with smartsuite (Closes: #178010)
* remove superflous whitespaces in description
* remove usr/bin from debian/dirs
-- Guido Guenther <agx@debian.org> Fri, 24 Jan 2003 00:51:26 +0100
smartmontools (5.1.1-2) unstable; urgency=low
* only start smartd if start_smartd=yes in /etc/default/smartmontools.
* initial upload (Closes: #174828).
-- Guido Guenther <agx@debian.org> Fri, 17 Jan 2003 23:04:50 +0000
smartmontools (5.1.1-1) unstable; urgency=low
* Initial Release.
-- Guido Guenther <agx@debian.org> Tue, 14 Jan 2003 12:58:00 +0000'
dpkg-buildpackage: info: source package smartmontools-build-deps-depends
dpkg-buildpackage: info: source version 7.99-2
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Equivs Dummy Package Generator <root@tnsbuilds01.tn.ixsystems.net>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture amd64
debian/rules clean
make[1]: Entering directory '/dpkg-src/equivs.OxXCMu'
dh clean
dh_clean
make[1]: Leaving directory '/dpkg-src/equivs.OxXCMu'
debian/rules binary
make[1]: Entering directory '/dpkg-src/equivs.OxXCMu'
dh binary
dh_update_autotools_config
dh_autoreconf
create-stamp debian/debhelper-build-stamp
dh_prep
dh_install
dh_installdocs
dh_installchangelogs
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_dwz
dh_strip
dh_makeshlibs
dh_shlibdeps
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'smartmontools-build-deps-depends' in '../smartmontools-build-deps-depends_7.99-2_amd64.deb'.
make[1]: Leaving directory '/dpkg-src/equivs.OxXCMu'
dpkg-genbuildinfo --build=binary
dpkg-genchanges --build=binary >../smartmontools-build-deps-depends_7.99-2_amd64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
The package has been created.
Attention, the package has been created in the current directory,
not in ".." as indicated by the message above!
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
libcap-ng-dev libpcre2-16-0 libpcre2-32-0 libpcre2-dev libpcre2-posix2
libselinux1-dev libsepol1-dev libsystemd-dev pkg-config
The following NEW packages will be installed:
libcap-ng-dev libpcre2-16-0 libpcre2-32-0 libpcre2-dev libpcre2-posix2
libselinux1-dev libsepol1-dev libsystemd-dev pkg-config
smartmontools-build-deps-depends
0 upgraded, 10 newly installed, 0 to remove and 1 not upgraded.
Need to get 2185 kB/2188 kB of archives.
After this operation, 7809 kB of additional disk space will be used.
Get:1 /dpkg-src/smartmontools-build-deps-depends_7.99-2_amd64.deb smartmontools-build-deps-depends amd64 7.99-2 [2232 B]
Get:2 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye/main amd64 libcap-ng-dev amd64 0.7.9-2.2+b1 [27.0 kB]
Get:3 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye/main amd64 libpcre2-16-0 amd64 10.36-2+deb11u1 [232 kB]
Get:4 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye/main amd64 libpcre2-32-0 amd64 10.36-2+deb11u1 [220 kB]
Get:5 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye/main amd64 libpcre2-posix2 amd64 10.36-2+deb11u1 [49.1 kB]
Get:6 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye/main amd64 libpcre2-dev amd64 10.36-2+deb11u1 [733 kB]
Get:7 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye/main amd64 libsepol1-dev amd64 3.1-1 [338 kB]
Get:8 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye/main amd64 libselinux1-dev amd64 3.1-3 [168 kB]
Get:9 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian-backports bullseye-backports/main amd64 libsystemd-dev amd64 252.5-2~bpo11+1 [351 kB]
Get:10 http://apt.tn.ixsystems.com/apt-direct/bluefin/nightlies/debian bullseye/main amd64 pkg-config amd64 0.29.2-1 [65.1 kB]
Fetched 2185 kB in 0s (27.4 MB/s)
E: Can not write log (Is /dev/pts mounted?) - posix_openpt (2: No such file or directory)
Selecting previously unselected package libcap-ng-dev.
(Reading database ... 31421 files and directories currently installed.)
Preparing to unpack .../0-libcap-ng-dev_0.7.9-2.2+b1_amd64.deb ...
Unpacking libcap-ng-dev (0.7.9-2.2+b1) ...
Selecting previously unselected package libpcre2-16-0:amd64.
Preparing to unpack .../1-libpcre2-16-0_10.36-2+deb11u1_amd64.deb ...
Unpacking libpcre2-16-0:amd64 (10.36-2+deb11u1) ...
Selecting previously unselected package libpcre2-32-0:amd64.
Preparing to unpack .../2-libpcre2-32-0_10.36-2+deb11u1_amd64.deb ...
Unpacking libpcre2-32-0:amd64 (10.36-2+deb11u1) ...
Selecting previously unselected package libpcre2-posix2:amd64.
Preparing to unpack .../3-libpcre2-posix2_10.36-2+deb11u1_amd64.deb ...
Unpacking libpcre2-posix2:amd64 (10.36-2+deb11u1) ...
Selecting previously unselected package libpcre2-dev:amd64.
Preparing to unpack .../4-libpcre2-dev_10.36-2+deb11u1_amd64.deb ...
Unpacking libpcre2-dev:amd64 (10.36-2+deb11u1) ...
Selecting previously unselected package libsepol1-dev:amd64.
Preparing to unpack .../5-libsepol1-dev_3.1-1_amd64.deb ...
Unpacking libsepol1-dev:amd64 (3.1-1) ...
Selecting previously unselected package libselinux1-dev:amd64.
Preparing to unpack .../6-libselinux1-dev_3.1-3_amd64.deb ...
Unpacking libselinux1-dev:amd64 (3.1-3) ...
Selecting previously unselected package libsystemd-dev:amd64.
Preparing to unpack .../7-libsystemd-dev_252.5-2~bpo11+1_amd64.deb ...
Unpacking libsystemd-dev:amd64 (252.5-2~bpo11+1) ...
Selecting previously unselected package pkg-config.
Preparing to unpack .../8-pkg-config_0.29.2-1_amd64.deb ...
Unpacking pkg-config (0.29.2-1) ...
Selecting previously unselected package smartmontools-build-deps-depends.
Preparing to unpack .../9-smartmontools-build-deps-depends_7.99-2_amd64.deb ...
Unpacking smartmontools-build-deps-depends (7.99-2) ...
Setting up libsepol1-dev:amd64 (3.1-1) ...
Setting up libpcre2-16-0:amd64 (10.36-2+deb11u1) ...
Setting up libpcre2-32-0:amd64 (10.36-2+deb11u1) ...
Setting up pkg-config (0.29.2-1) ...
Setting up libpcre2-posix2:amd64 (10.36-2+deb11u1) ...
Setting up libcap-ng-dev (0.7.9-2.2+b1) ...
Setting up libsystemd-dev:amd64 (252.5-2~bpo11+1) ...
Setting up libpcre2-dev:amd64 (10.36-2+deb11u1) ...
Setting up libselinux1-dev:amd64 (3.1-3) ...
Setting up smartmontools-build-deps-depends (7.99-2) ...
Processing triggers for man-db (2.9.4-2) ...
Processing triggers for libc-bin (2.31-13+deb11u4) ...
dch warning: Recognised distributions are:
experimental, unstable, testing, stable, oldstable, oldoldstable,
{bullseye,buster,stretch,jessie,wheezy}-proposed-updates,
{testing,stable,oldstable,oldoldstable}-proposed-updates,
{bullseye,buster,stretch,jessie,wheezy}-security,
{testing,stable,oldstable,oldoldstable}}-security, buster-backports, bullseye-backports and UNRELEASED.
Using your request anyway.
Running build command: 'DEB_BUILD_OPTIONS=nocheck debuild -j12 -us -uc -b'
dpkg-buildpackage -us -uc -ui -j12 -b
dpkg-buildpackage: info: source package smartmontools
dpkg-buildpackage: info: source version 7.99-3
dpkg-buildpackage: info: source distribution bullseye-truenas-unstable
dpkg-buildpackage: info: source changed by Dmitry Smirnov <onlyjob@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture amd64
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 52_remove-pragma.diff
dpkg-source: info: applying 53_use-smartd-runner-by-default.diff
dpkg-source: info: applying 54_remove-Id-from-smartd.conf.diff
dpkg-source: info: applying 61_cciss-doc.patch
dpkg-source: info: applying 63_removable.patch
dpkg-source: info: applying default_never-quit.patch
dpkg-source: info: applying manpage.diff
dpkg-source: info: applying service-alias.patch
dpkg-source: info: applying extend-timeout.patch
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
debian/rules override_dh_autoreconf
make[1]: Entering directory '/dpkg-src'
dh_autoreconf
Makefile.am:126: warning: source file 'os_win32/popen_win32.cpp' is in a subdirectory,
Makefile.am:126: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Makefile.am:219: warning: source file 'getopt/getopt.c' is in a subdirectory,
Makefile.am:219: but option 'subdir-objects' is disabled
Makefile.am:219: warning: source file 'getopt/getopt1.c' is in a subdirectory,
Makefile.am:219: but option 'subdir-objects' is disabled
Makefile.am:239: warning: source file 'regex/regex.c' is in a subdirectory,
Makefile.am:239: but option 'subdir-objects' is disabled
Makefile.am:264: warning: source file 'os_win32/wmiquery.cpp' is in a subdirectory,
Makefile.am:264: but option 'subdir-objects' is disabled
Makefile.am:250: warning: source file 'regex/regcomp.c' is in a subdirectory,
Makefile.am:250: but option 'subdir-objects' is disabled
Makefile.am:250: warning: source file 'regex/regexec.c' is in a subdirectory,
Makefile.am:250: but option 'subdir-objects' is disabled
Makefile.am:250: warning: source file 'regex/regex_internal.c' is in a subdirectory,
Makefile.am:250: but option 'subdir-objects' is disabled
Makefile.am:200: warning: source file 'os_win32/daemon_win32.cpp' is in a subdirectory,
Makefile.am:200: but option 'subdir-objects' is disabled
Makefile.am:200: warning: source file 'os_win32/popen_win32.cpp' is in a subdirectory,
Makefile.am:200: but option 'subdir-objects' is disabled
Makefile.am:200: warning: source file 'os_win32/syslog_win32.cpp' is in a subdirectory,
Makefile.am:200: but option 'subdir-objects' is disabled
Makefile.am:227: warning: source file 'getopt/getopt.c' is in a subdirectory,
Makefile.am:227: but option 'subdir-objects' is disabled
Makefile.am:227: warning: source file 'getopt/getopt1.c' is in a subdirectory,
Makefile.am:227: but option 'subdir-objects' is disabled
Makefile.am:244: warning: source file 'regex/regex.c' is in a subdirectory,
Makefile.am:244: but option 'subdir-objects' is disabled
Makefile.am:269: warning: source file 'os_win32/wmiquery.cpp' is in a subdirectory,
Makefile.am:269: but option 'subdir-objects' is disabled
Makefile.am:255: warning: source file 'regex/regcomp.c' is in a subdirectory,
Makefile.am:255: but option 'subdir-objects' is disabled
Makefile.am:255: warning: source file 'regex/regexec.c' is in a subdirectory,
Makefile.am:255: but option 'subdir-objects' is disabled
Makefile.am:255: warning: source file 'regex/regex_internal.c' is in a subdirectory,
Makefile.am:255: but option 'subdir-objects' is disabled
./autogen.sh
Note: GNU Automake version 1.16.3 was not tested by the developers.
Please report success/failure to the smartmontools-support mailing list.
aclocal-1.16: overwriting 'm4/pkg.m4' with '/usr/share/aclocal/pkg.m4'
Makefile.am:126: warning: source file 'os_win32/popen_win32.cpp' is in a subdirectory,
Makefile.am:126: but option 'subdir-objects' is disabled
automake-1.16: warning: possible forward-incompatibility.
automake-1.16: At least a source file is in a subdirectory, but the 'subdir-objects'
automake-1.16: automake option hasn't been enabled. For now, the corresponding output
automake-1.16: object file(s) will be placed in the top-level directory. However,
automake-1.16: this behaviour will change in future Automake versions: they will
automake-1.16: unconditionally cause object files to be placed in the same subdirectory
automake-1.16: of the corresponding sources.
automake-1.16: You are advised to start using 'subdir-objects' option throughout your
automake-1.16: project, to avoid future incompatibilities.
Makefile.am:219: warning: source file 'getopt/getopt.c' is in a subdirectory,
Makefile.am:219: but option 'subdir-objects' is disabled
Makefile.am:219: warning: source file 'getopt/getopt1.c' is in a subdirectory,
Makefile.am:219: but option 'subdir-objects' is disabled
Makefile.am:239: warning: source file 'regex/regex.c' is in a subdirectory,
Makefile.am:239: but option 'subdir-objects' is disabled
Makefile.am:264: warning: source file 'os_win32/wmiquery.cpp' is in a subdirectory,
Makefile.am:264: but option 'subdir-objects' is disabled
Makefile.am:250: warning: source file 'regex/regcomp.c' is in a subdirectory,
Makefile.am:250: but option 'subdir-objects' is disabled
Makefile.am:250: warning: source file 'regex/regexec.c' is in a subdirectory,
Makefile.am:250: but option 'subdir-objects' is disabled
Makefile.am:250: warning: source file 'regex/regex_internal.c' is in a subdirectory,
Makefile.am:250: but option 'subdir-objects' is disabled
Makefile.am:200: warning: source file 'os_win32/daemon_win32.cpp' is in a subdirectory,
Makefile.am:200: but option 'subdir-objects' is disabled
Makefile.am:200: warning: source file 'os_win32/popen_win32.cpp' is in a subdirectory,
Makefile.am:200: but option 'subdir-objects' is disabled
Makefile.am:200: warning: source file 'os_win32/syslog_win32.cpp' is in a subdirectory,
Makefile.am:200: but option 'subdir-objects' is disabled
Makefile.am:227: warning: source file 'getopt/getopt.c' is in a subdirectory,
Makefile.am:227: but option 'subdir-objects' is disabled
Makefile.am:227: warning: source file 'getopt/getopt1.c' is in a subdirectory,
Makefile.am:227: but option 'subdir-objects' is disabled
Makefile.am:244: warning: source file 'regex/regex.c' is in a subdirectory,
Makefile.am:244: but option 'subdir-objects' is disabled
Makefile.am:269: warning: source file 'os_win32/wmiquery.cpp' is in a subdirectory,
Makefile.am:269: but option 'subdir-objects' is disabled
Makefile.am:255: warning: source file 'regex/regcomp.c' is in a subdirectory,
Makefile.am:255: but option 'subdir-objects' is disabled
Makefile.am:255: warning: source file 'regex/regexec.c' is in a subdirectory,
Makefile.am:255: but option 'subdir-objects' is disabled
Makefile.am:255: warning: source file 'regex/regex_internal.c' is in a subdirectory,
Makefile.am:255: but option 'subdir-objects' is disabled
make[1]: Leaving directory '/dpkg-src'
debian/rules override_dh_auto_configure
make[1]: Entering directory '/dpkg-src'
CFLAGS="-g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall" CXXFLAGS="-g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall" \
dh_auto_configure -- \
--build=x86_64-linux-gnu \
--host=x86_64-linux-gnu \
--prefix=/usr \
--sysconfdir=/etc \
--mandir=/usr/share/man \
--with-initscriptdir=no \
--docdir=/usr/share/doc/smartmontools \
--with-attributelog=/var/lib/smartmontools/attrlog. \
--with-drivedbdir=/var/lib/smartmontools/drivedb \
--with-exampledir=/usr/share/doc/smartmontools/examples/ \
--with-savestates=/var/lib/smartmontools/smartd. \
--with-smartdplugindir=/etc/smartmontools/smartd_warning.d \
--with-smartdscriptdir=/usr/share/smartmontools \
--with-systemdenvfile=/etc/default/smartmontools \
--with-systemdsystemunitdir=/lib/systemd/system \
--with-libsystemd=auto \
--with-selinux \
;
./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --build=x86_64-linux-gnu --host=x86_64-linux-gnu --prefix=/usr --sysconfdir=/etc --mandir=/usr/share/man --with-initscriptdir=no --docdir=/usr/share/doc/smartmontools --with-attributelog=/var/lib/smartmontools/attrlog. --with-drivedbdir=/var/lib/smartmontools/drivedb --with-exampledir=/usr/share/doc/smartmontools/examples/ --with-savestates=/var/lib/smartmontools/smartd. --with-smartdplugindir=/etc/smartmontools/smartd_warning.d --with-smartdscriptdir=/usr/share/smartmontools --with-systemdenvfile=/etc/default/smartmontools --with-systemdsystemunitdir=/lib/systemd/system --with-libsystemd=auto --with-selinux
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-linux-gnu-g++... x86_64-linux-gnu-g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether x86_64-linux-gnu-g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of x86_64-linux-gnu-g++... none
checking for x86_64-linux-gnu-gcc... x86_64-linux-gnu-gcc
checking whether we are using the GNU C compiler... yes
checking whether x86_64-linux-gnu-gcc accepts -g... yes
checking for x86_64-linux-gnu-gcc option to accept ISO C89... none needed
checking whether x86_64-linux-gnu-gcc understands -c and -o together... yes
checking dependency style of x86_64-linux-gnu-gcc... none
checking dependency style of x86_64-linux-gnu-gcc... none
checking for x86_64-linux-gnu-pkg-config... /usr/bin/x86_64-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for x86_64-linux-gnu-nm... x86_64-linux-gnu-nm
checking whether this is a build from SVN... no
checking how to run the C++ preprocessor... x86_64-linux-gnu-g++ -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking sys/sysmacros.h usability... yes
checking sys/sysmacros.h presence... yes
checking for sys/sysmacros.h... yes
checking linux/compiler.h usability... no
checking linux/compiler.h presence... no
checking for linux/compiler.h... no
checking for linux/cciss_ioctl.h... yes
checking for __int128... yes
checking for long double with more range or precision than double... yes
checking for getopt_long... yes
checking for clock_gettime... yes
checking for ftime... yes
checking for gettimeofday... yes
checking whether byte ordering is bigendian... no
checking whether x86_64-linux-gnu-g++ supports __attribute__((packed))... yes
checking selinux/selinux.h usability... yes
checking selinux/selinux.h presence... yes
checking for selinux/selinux.h... yes
checking for matchpathcon in -lselinux... yes
checking cap-ng.h usability... yes
checking cap-ng.h presence... yes
checking for cap-ng.h... yes
checking for capng_clear in -lcap-ng... yes
checking systemd/sd-daemon.h usability... yes
checking systemd/sd-daemon.h presence... yes
checking for systemd/sd-daemon.h... yes
checking for sd_notify in -lsystemd... yes
checking for sigaction... yes
checking for x86_64-linux-gnu-g++ option to accept C++11... none needed
checking for regcomp... yes
checking whether os_linux.cpp uses new interface... yes
checking whether NVMe device scanning could be safely enabled... yes
checking whether _FORTIFY_SOURCE is predefined... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
checking whether make sets $(MAKE)... (cached) yes
configure:
-----------------------------------------------------------------------------
smartmontools-7.2 configuration:
host operating system: x86_64-pc-linux-gnu
C++ compiler: x86_64-linux-gnu-g++
C compiler: x86_64-linux-gnu-gcc
preprocessor flags: -Wdate-time -D_FORTIFY_SOURCE=2
C++ compiler flags: -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W
C compiler flags: -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall
linker flags: -Wl,-z,relro -Wl,-z,now
OS specific modules: os_linux.o cciss.o dev_areca.o -lselinux
binary install path: /usr/sbin
man page install path: /usr/share/man
doc file install path: /usr/share/doc/smartmontools
examples install path: /usr/share/doc/smartmontools/examples/
drive database file: /var/lib/smartmontools/drivedb/drivedb.h
database update script: /usr/sbin/update-smart-drivedb
database update branch: branches/RELEASE_7_2_DRIVEDB
download tools: curl wget lynx svn
GnuPG for verification: gpg
local drive database: /etc/smart_drivedb.h
smartd config file: /etc/smartd.conf
smartd warning script: /usr/share/smartmontools/smartd_warning.sh
smartd plugin path: /etc/smartmontools/smartd_warning.d
PATH within scripts: /usr/local/bin:/usr/bin:/bin
smartd service file: /lib/systemd/system/smartd.service
smartd environ file: /etc/default/smartmontools
smartd save files: /var/lib/smartmontools/smartd.MODEL-SERIAL.TYPE.state
smartd attribute logs: /var/lib/smartmontools/attrlog.MODEL-SERIAL.TYPE.csv
SELinux support: yes
libcap-ng support: yes
systemd notify support: yes
NVMe DEVICESCAN: yes
-----------------------------------------------------------------------------
configure: WARNING:
The default for the inclusion of NVME devices in smartd.conf
'DEVICESCAN' and 'smartctl --scan' has been changed to 'yes' on
this platform. If '--without-nvme-devicescan' is still needed,
please inform smartmontools-support@listi.jpberlin.de.
Use option '--with-nvme-devicescan' to suppress this warning.
make[1]: Leaving directory '/dpkg-src'
dh_auto_build
make -j12
make[1]: Entering directory '/dpkg-src'
make all-am
make[2]: Entering directory '/dpkg-src'
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o atacmdnames.o atacmdnames.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o atacmds.o atacmds.cpp
cat ChangeLog NEWS $(SOURCES) | $(VERSION_FROM_SVN_IDS) > svnversion.h
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o ataidentify.o ataidentify.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o ataprint.o ataprint.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o dev_ata_cmd_set.o dev_ata_cmd_set.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o dev_intelliprop.o dev_intelliprop.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o dev_interface.o dev_interface.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o dev_jmb39x_raid.o dev_jmb39x_raid.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o json.o json.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o knowndrives.o knowndrives.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o nvmecmds.o nvmecmds.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o nvmeprint.o nvmeprint.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o scsicmds.o scsicmds.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o scsiata.o scsiata.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o scsinvme.o scsinvme.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o scsiprint.o scsiprint.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o utility.o utility.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o os_linux.o os_linux.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o cciss.o cciss.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o dev_areca.o dev_areca.cpp
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o smartd.o smartd.cpp
/bin/bash ./config.status --file=update-smart-drivedb
os_linux.cpp: In function 'int os_linux::setup_3ware_nodes(const char*, const char*)':
os_linux.cpp:1590:22: warning: 'security_context_t' is deprecated [-Wdeprecated-declarations]
1590 | security_context_t orig_context = NULL;
| ^~~~~~~~~~~~
In file included from os_linux.cpp:67:
/usr/include/selinux/selinux.h:17:15: note: declared here
17 | typedef char *security_context_t
| ^~~~~~~~~~~~~~~~~~
os_linux.cpp:1591:22: warning: 'security_context_t' is deprecated [-Wdeprecated-declarations]
1591 | security_context_t node_context = NULL;
| ^~~~~~~~~~~~
In file included from os_linux.cpp:67:
/usr/include/selinux/selinux.h:17:15: note: declared here
17 | typedef char *security_context_t
| ^~~~~~~~~~~~~~~~~~
os_linux.cpp:1628:27: warning: 'void matchpathcon_fini()' is deprecated: Use selabel_close [-Wdeprecated-declarations]
1628 | matchpathcon_fini();
| ^
In file included from os_linux.cpp:67:
/usr/include/selinux/selinux.h:483:13: note: declared here
483 | extern void matchpathcon_fini(void)
| ^~~~~~~~~~~~~~~~~
os_linux.cpp:1640:68: warning: 'int matchpathcon(const char*, mode_t, char**)' is deprecated: Use selabel_lookup instead [-Wdeprecated-declarations]
1640 | if (matchpathcon(nodestring, S_IRUSR | S_IWUSR, &node_context) < 0) {
| ^
In file included from os_linux.cpp:67:
/usr/include/selinux/selinux.h:500:12: note: declared here
500 | extern int matchpathcon(const char *path,
| ^~~~~~~~~~~~
os_linux.cpp:1717:23: warning: 'void matchpathcon_fini()' is deprecated: Use selabel_close [-Wdeprecated-declarations]
1717 | matchpathcon_fini();
| ^
In file included from os_linux.cpp:67:
/usr/include/selinux/selinux.h:483:13: note: declared here
483 | extern void matchpathcon_fini(void)
| ^~~~~~~~~~~~~~~~~
/bin/bash ./config.status --file=smartd_warning.sh
$(MAN_FILTER) < ./smartd.conf.5.in > smartd.conf.5
$(MAN_FILTER) < ./smartctl.8.in > smartctl.8
$(MAN_FILTER) < ./smartd.8.in > smartd.8
config.status: creating smartd_warning.sh
$(MAN_FILTER) < ./update-smart-drivedb.8.in > update-smart-drivedb.8
config.status: creating update-smart-drivedb
chmod +x smartd_warning.sh
$(SMARTD_SERVICE_FILTER) < ./smartd.service.in > smartd.service
x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."' -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -c -o smartctl.o smartctl.cpp
chmod +x update-smart-drivedb
x86_64-linux-gnu-g++ -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -Wl,-z,relro -Wl,-z,now -o smartctl smartctl.o atacmdnames.o atacmds.o ataidentify.o ataprint.o dev_ata_cmd_set.o dev_intelliprop.o dev_interface.o dev_jmb39x_raid.o json.o knowndrives.o nvmecmds.o nvmeprint.o scsicmds.o scsiata.o scsinvme.o scsiprint.o utility.o os_linux.o cciss.o dev_areca.o -lselinux
x86_64-linux-gnu-g++ -g -O2 -ffile-prefix-map=/dpkg-src=. -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -W -Wl,-z,relro -Wl,-z,now -o smartd smartd.o atacmdnames.o atacmds.o dev_ata_cmd_set.o dev_intelliprop.o dev_interface.o dev_jmb39x_raid.o knowndrives.o nvmecmds.o scsicmds.o scsiata.o scsinvme.o utility.o os_linux.o cciss.o dev_areca.o -lcap-ng -lsystemd -lselinux
make[2]: Leaving directory '/dpkg-src'
make[1]: Leaving directory '/dpkg-src'
dh_auto_test
create-stamp debian/debhelper-build-stamp
dh_prep
dh_installdirs
dh_auto_install
make -j12 install DESTDIR=/dpkg-src/debian/smartmontools AM_UPDATE_INFO_DIR=no
make[1]: Entering directory '/dpkg-src'
make[2]: Entering directory '/dpkg-src'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/etc'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/usr/sbin'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/usr/sbin'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/etc/smartmontools/smartd_warning.d'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/var/lib/smartmontools/drivedb'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/var/lib/smartmontools'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/usr/share/doc/smartmontools/examples/'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/usr/share/doc/smartmontools'
/usr/bin/install -c -m 644 './smartd.conf' '/dpkg-src/debian/smartmontools/etc/smartd.conf'
/usr/bin/install -c update-smart-drivedb '/dpkg-src/debian/smartmontools/usr/sbin'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/var/lib/smartmontools'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/usr/share/doc/smartmontools/examples/'
/usr/bin/install -c -m 644 drivedb.h '/dpkg-src/debian/smartmontools/var/lib/smartmontools/drivedb'
/usr/bin/install -c -m 644 examplescripts/README '/dpkg-src/debian/smartmontools/usr/share/doc/smartmontools/examples/'
/usr/bin/install -c smartctl smartd '/dpkg-src/debian/smartmontools/usr/sbin'
/usr/bin/install -c -m 644 AUTHORS ChangeLog ChangeLog-6.0-7.0 COPYING INSTALL NEWS README TODO smartd.conf '/dpkg-src/debian/smartmontools/usr/share/doc/smartmontools'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/usr/share/smartmontools'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/usr/share/man/man8'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/lib/systemd/system'
/usr/bin/mkdir -p '/dpkg-src/debian/smartmontools/usr/share/man/man5'
/usr/bin/install -c examplescripts/Example1 examplescripts/Example2 examplescripts/Example3 examplescripts/Example4 examplescripts/Example5 examplescripts/Example6 examplescripts/Example7 examplescripts/Example8 '/dpkg-src/debian/smartmontools/usr/share/doc/smartmontools/examples/'
/usr/bin/install -c smartd_warning.sh '/dpkg-src/debian/smartmontools/usr/share/smartmontools'
/usr/bin/install -c -m 644 smartctl.8 smartd.8 update-smart-drivedb.8 '/dpkg-src/debian/smartmontools/usr/share/man/man8'
/usr/bin/install -c -m 644 smartd.service '/dpkg-src/debian/smartmontools/lib/systemd/system'
/usr/bin/install -c -m 644 smartd.conf.5 '/dpkg-src/debian/smartmontools/usr/share/man/man5'
make[2]: Leaving directory '/dpkg-src'
make[1]: Leaving directory '/dpkg-src'
debian/rules override_dh_install
make[1]: Entering directory '/dpkg-src'
dh_install
rm -f -v \
debian/smartmontools/lib/systemd/system/smartd.service \
debian/smartmontools/usr/share/doc/smartmontools/ChangeLog \
debian/smartmontools/usr/share/doc/smartmontools/COPYING \
debian/smartmontools/usr/share/doc/smartmontools/INSTALL \
debian/smartmontools/usr/share/doc/smartmontools/TODO \
;
removed 'debian/smartmontools/lib/systemd/system/smartd.service'
removed 'debian/smartmontools/usr/share/doc/smartmontools/ChangeLog'
removed 'debian/smartmontools/usr/share/doc/smartmontools/COPYING'
removed 'debian/smartmontools/usr/share/doc/smartmontools/INSTALL'
removed 'debian/smartmontools/usr/share/doc/smartmontools/TODO'
## #976696
mv -v debian/smartmontools/var/lib/smartmontools/drivedb/* debian/smartmontools/usr/share/smartmontools/
renamed 'debian/smartmontools/var/lib/smartmontools/drivedb/drivedb.h' -> 'debian/smartmontools/usr/share/smartmontools/drivedb.h'
make[1]: Leaving directory '/dpkg-src'
dh_installdocs
dh_installchangelogs
dh_installman
debian/rules override_dh_installinit
make[1]: Entering directory '/dpkg-src'
dh_installinit --no-start
make[1]: Leaving directory '/dpkg-src'
dh_installsystemd
dh_bugfiles
dh_lintian
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
debian/rules override_dh_fixperms
make[1]: Entering directory '/dpkg-src'
dh_fixperms
chmod -c 755 \
/dpkg-src/debian/smartmontools/etc/smartmontools/run.d/10mail \
/dpkg-src/debian/smartmontools/usr/share/smartmontools/smartd-runner \
;
mode of '/dpkg-src/debian/smartmontools/etc/smartmontools/run.d/10mail' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x)
mode of '/dpkg-src/debian/smartmontools/usr/share/smartmontools/smartd-runner' changed from 0644 (rw-r--r--) to 0755 (rwxr-xr-x)
make[1]: Leaving directory '/dpkg-src'
dh_missing
dh_dwz
dh_strip
dh_makeshlibs
dh_shlibdeps
dh_installdeb
dh_gencontrol
dpkg-gencontrol: warning: Recommends field of package smartmontools: substitution variable ${misc:Recommends} used, but is not defined
dpkg-gencontrol: warning: Recommends field of package smartmontools: substitution variable ${misc:Recommends} used, but is not defined
dh_md5sums
dh_builddeb
dpkg-deb: building package 'smartmontools-dbgsym' in '../smartmontools-dbgsym_7.99-3_amd64.deb'.
dpkg-deb: building package 'smartmontools' in '../smartmontools_7.99-3_amd64.deb'.
dpkg-genbuildinfo --build=binary
dpkg-genchanges --build=binary >../smartmontools_7.99-3_amd64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-source: info: unapplying extend-timeout.patch
dpkg-source: info: unapplying service-alias.patch
dpkg-source: info: unapplying manpage.diff
dpkg-source: info: unapplying default_never-quit.patch
dpkg-source: info: unapplying 63_removable.patch
dpkg-source: info: unapplying 61_cciss-doc.patch
dpkg-source: info: unapplying 54_remove-Id-from-smartd.conf.diff
dpkg-source: info: unapplying 53_use-smartd-runner-by-default.diff
dpkg-source: info: unapplying 52_remove-pragma.diff
dpkg-buildpackage: info: binary-only upload (no source included)
Now running lintian smartmontools_7.99-3_amd64.changes ...
warning: running with root privileges is not recommended!
E: smartmontools changes: bad-distribution-in-changes-file bullseye-truenas-unstable
N: 1 hint overridden (1 info)
Finished running lintian.
Copying finished packages
umount: /truenas-releng/tmp/dpkg-overlay_smartmontools: target is busy.
Building local APT repo Packages.gz...
dpkg-scanpackages: warning: Packages in archive but missing from override file:
dpkg-scanpackages: warning: avahi-autoipd avahi-autoipd-dbgsym avahi-daemon avahi-daemon-dbgsym avahi-discover avahi-dnsconfd avahi-dnsconfd-dbgsym avahi-ui-utils avahi-ui-utils-dbgsym avahi-utils avahi-utils-dbgsym gir1.2-avahi-0.6 libavahi-client-dev libavahi-client3 libavahi-client3-dbgsym libavahi-common-data libavahi-common-dev libavahi-common3 libavahi-common3-dbgsym libavahi-compat-libdnssd-dev libavahi-compat-libdnssd1 libavahi-compat-libdnssd1-dbgsym libavahi-core-dev libavahi-core7 libavahi-core7-dbgsym libavahi-glib-dev libavahi-glib1 libavahi-glib1-dbgsym libavahi-gobject-dev libavahi-gobject0 libavahi-gobject0-dbgsym libavahi-ui-gtk3-0 libavahi-ui-gtk3-0-dbgsym libavahi-ui-gtk3-dev migrate93 python3-avahi python3-netsnmpagent smartmontools smartmontools-dbgsym truenas-installer
dpkg-scanpackages: info: Wrote 40 entries to output Packages file.